Skip to content
+43 (0) 2252 53169
Menu

Area of work

Cable fault location and cable testing

From the service cable to medium voltage the approach is the same: first measure the condition of the cores, then the distance, then pinpoint the spot above the route. We work with pulse reflection, measuring bridge, step voltage and sheath fault location – and test the run again after the repair, so that nobody digs twice.

Call us +43 (0) 2252 53169 Describe your case

9 services in this area

All areas of work
Cable testing LV and MV VLF cable testing and sheath test to DIN VDE 0276-620 View Control and coaxial cables Control cable dead, signal gone? View Fault location, low voltage A supply cable out of service? View Fault location, medium voltage A feeder on the medium-voltage ring has failed? View Heating mats and cables Underfloor heating staying cold or the fuse tripping? View Ramp and stair heating Ramp heating stays cold, the driveway ices over? View Service and supply cables Service connection or supply cable faulty? View Street lighting A lighting section dark? View Telecoms, data and cable TV Telephone dead, internet gone, TV signal disturbed? View

Download the brochure for this area PDF · 8 pages · 2.0 MB · in German

Service area

Do we come to you?

The whole of Austria from our base in Traiskirchen; southern Germany – Bavaria and Baden-Württemberg – through CFT Group Deutschland GmbH in Erding. Some services in this area we cover only regionally; the "At a glance" table of the service says so.

Call us +43 (0) 2252 53169 Describe your case

Austria 2514 Traiskirchen
Germany 85435 Erding

Map of Austria: the whole country is shaded as the service area, the company base in the Baden district marked in red
Core areaProject area
Describe your case

Describe the findings.

The more precisely you describe the findings, the more directly we can go to work. Plans, readings and photos help us settle the method in advance.

What happens next

  1. We read your message and match the case to a method.
  2. We come back to you – usually with a question that shortens the appointment.
  3. We confirm the appointment and what it costs before anyone sets off.

Rather talk?
+43 (0) 2252 53169
Mon–Thu 8:00–16:30 · Fri 8:00–12:00

Describe your case

Fields marked Required must be filled in.

For example: what caught your attention, where the section lies, what has already been measured or switched.

A few quick ticks – if you like

All optional. Tick whatever fits – several answers are fine. Whatever you don’t know, just leave blank.

Which voltage level is it about?
How long is the section, roughly?
Can the section be isolated?
Section, street or manhole number – whatever is designated.
Up to eight files, each up to 12 MB, 40 MB in total. JPG, PNG, HEIC, WebP or PDF. Most helpful: the as-built plan of the section and the latest series of readings.

Telephone or email – we need one of the two to answer you.

How we handle your details is set out in the privacy notice (in German).

We will come back to you. Your details go exclusively to dienstleistung@cft.at and are not passed on.

We do not come to search. We are here to find.

The evolution of pipe and cable locating, from right to left: dowsing rod, probing rod, electromagnetic receiver, ground penetrating radar.